There has been evidence that the schematics of a radionic machine drawn or printed on paper or cardboard will work as well as a real radionics machine with resistors, wires, capacitors, diodes, etc.
In letters written between Dr. Galen T. Hieronymus and John W. Campbell, Editor of Smith & Streets Astounding Science Fiction Magazine and Analog Magazine both published in the 1950’s, Mr. Campbell stated that he had constructed a radionic machine built entirely of paper with the schematics drawn with India ink, and according to Mr. Cambell “The machine worked beautifully and the consistency of performance is excellent”. Mr. Hieronymus wasn’t so optimistic that a symbolic radionic machine would work so well. At any rate, I have included a schematic diagram of a radionic machine, along with instructions on how to make it. I have only experimented very briefly with this type of machine so I cannot vouch for how well it works, some say the operator has much to do with it’s accuracy and effectiveness, as with any radionic machine, the intent of the operator is everything. It is for experimental purposes only.
Download The Symbolic Radionics Machine here :symbolic radionic machine without dial to go pdf
Download the dial here :DIAL FOR SYMBOLIC MACHINE
DIRECTIONS FOR USING THE SYMBOLIC RADIONICS MACHINE
Print out the symbolic radionics machine and the dial
Have the machine and the knob laminated.
Once laminated glue radionics machine to a sheet of plywood or plexiglass
Glue rubber “feet” under the machine to keep it from slipping.
Make a small hole in dial and machine and fasten dial with a small nut, bolt, and washers. (Leave it loose enough to turn)
Now you are finished.
To Use, Wave a magnet over the surface to clear any residual unwanted energies.
Some people place a quartz crystal over the “battery” to give the machine more power, but it will work without the crystal.
Place a “witness” (photo, hair clipping, blood spot, leaf etc.) on Witness Plate.
Now slowly turn the dial while rubbing the Rub Plate, and concentrating on your intention.
You can also use the dial to give you “YES” or “NO” answers by mentally designating the numbers from 0-500 to mean YES, and the numbers from 500- 1000 to mean NO.
Once you get a “stick” leave the machine on that setting and the machine will continuously broadcast your intention.
Reblogged this on Mano-Lucha and commented:
Radionics
LikeLike
I have not heard this before, could be true . The early radionics machines used tubes.
LikeLike