Continuious v.s. Pulsed Brodcasting

There are three different ways you can broadcast with a radionic instrument to balance energy.  Continuously with the amp switch (power switch) left on. Another way is with the amp switch off , you don’t actually need any electrical power to operate a radionic instrument , using electrical power shortens the broadcast time . Dr.  Ruth Drown, used instruments that weren’t designed to be plugged into an electrical source, they relied on subtle energy only.

The third way is pulsed broadcasting , which is an on/off method of radionic broadcast . In some cases this is the most effective way of broadcasting. Some radionic instruments used to come with a timer that you could set to turn on your instruments for a specified amount of time and off for a specified amount of time, most instruments today don’t offer that feature, but you can use an electronic timer that you plug your instrument into.

How do you know if you should use a pulsed or continuous broadcast ? you need to dowse for the answer. Dowsing is one of the most important skills that you can have as a radionics operator, it is where radiestesia and radionics come togeather. I describe dowsing here. Radionic and Pendulum Dowsing.

First of all, when you are ready to make a radionic broadcast, you would dowse the question ” Should this be a pulsed  broadcast” YES or NO,  if you get a YES, next dowse to determine if the ON time should be in seconds, minutes, hours, days. Now dowse if the off time should be in seconds, minutes, hours, days. Next dowse for how many ON/OFF cycles. You can use your intensity dial as a dowsing tool, the number on the dial, when you get a stick is your answer.

You can buy a cheap kitchen timer, to turn your instrument ON and OFF at the required times such as this one, available in stores and eBay,



I personally use the timer pictured below, it is more expensive, but more accurate. Available on eBay or Amazon.

timer 2

Pulsed broadcasting isn’t something you’ll use all the time in radionic work, but it’s another tool in your tool box, and it’s good to have the option of using it.